• Flame-arresting one-way pressure-relief vent for safety and long life.
• Case and cover of high-impact polypropylene with reinforced endwalls to reduce bulging.
• Thermally welded case-to-cover bond to ensure a leak-proof seal.
• Absorbent Glass Mat (AGM) technology for efficient gas recombination 99% plus.
• Thick positive plate design for maximum service float life.
• Removable carrying handles.
• Gas recombination efficiency of up to 99% for freedom from electrolyte maintenance.
• Multicell design for ease of installation and maintenance.
• UL-recognized component.
• Not restricted for air transport - Complies with IATA/ICAO Special Provision A67.
• Not restricted for surface transport - classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.
• Not restricted for water transport - classified as non-hazardous material per IMDG Amendment 27.
• Can be used in any orientation. Upright, side or end mounting recommended.

BBA-160RT - Specifications
Cells Per Unit	Voltage Per Unit	Max. Weight	Electrolyte		Maximum Discharge Current	Short Circuit Current	10 Sec. Volts @ 100 Amps	Ohms Imped. 60 Hz
6	12.84	62 lbs. 28 kg.	Absorbed H2SO4 SG = 1.300		800 Amps	3300 Amps @ 0.1 sec.	11.6	0.0040 Ohms
Capacity			88 Ah @ 20 hour rate to 1.75 volts per cell @ 77°F (25°C)
Operating Temperature Range			Discharge; -40°F (-40°C) to +160°F (71°C)			Charge; -10°F (-23°C) to +140°F (60°C) (with temperature compensation)
Nominal Operating Temperature Range			+74°F (23°C) to +80°F (27°C)
Float Charging Voltage			13.5 to 13.8 VDC/unit Average @ 77°F (25°C)
Recommended Maximum Charging Current Limit			C/5 amperes (17.6 amps @ 100% depth of discharge) @ 20 hour rate
Maximum AC Ripple (Charger)			0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. Maximum AC ripple voltage allowed = 1.4% RMS (4% P-P) Maximum AC ripple current allowed = 4.4 amperes RMS (C/20)
Self Discharge			Dynasty Broadband batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter.
Accessories			Inter unit connectors, racks and cabinet systems are available.
Terminal			"L" terminal with 0.28" clearance hole to accept 0.25" (6mm) bolt.
Terminal Hardware Initial Torque			65 in.-lbs. (7.4 N-m).
Terminal Hardware Annual Retorque			52 in.-lbs. (5.8 N-m).

Return