FEATURES

• Flame-arresting one-way pressure-relief vent for safety and long life.
• Thermally welded case-to-cover bond to ensure a leak-proof seal.
• Thick positive plate design for maximum service float life.
• Case and cover of high-impact polypropylene with reinforced endwalls to reduce bulging.
• Removable carrying handles.
• Gas recombination efficiency of up to 99% for freedom from electrolyte maintenance.
• Designed to meet full published ratings at initial start-up installation.
• Multicell design for ease of installation and maintenance.
• UL-recognized component.
• Complies with UN 2794.
• Not restricted for surface transport - classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.
• Gelled electrolyte for superior float service life and thermal management.
• Can be used in any orientation. Upright, side or end mounting recommended.

BBG-180RT - Specifications
Cells Per Unit	Voltage Per Unit	Max. Weight	Electrolyte		Maximum Discharge Current	Short Circuit Current	10 Sec. Volts @100 Amps	Ohms Imped. 60 Hz
6	12.84	66 lbs. 30 kg.	Gelled H2SO4 SG = 1.300		900 Amps	2500 Amps @ 0.1 sec.	11.3	0.0050 Ohms
Capacity			93.6 Ah @ 20 hour rate to 1.75 volts per cell @ 77°F (25°C).
Operating Temperature Range			Discharge; -40°F (-40°C) to +160°F (71°C).			Charge; -10°F (-23°C) to +140°F (60°C). (with temperature compensation)
Nominal Operating Temperature Range			+74°F (23°C) to +80°F (27°C).
Float Charging Voltage			13.5 to 13.8 VDC/unit Average @ 77°F (25°C).
Recommended Maximum Charging Current Limit			C/5 amperes (18.7 amps @ 100% depth of discharge) @ 20 hour rate.
Maximum AC Ripple (Charger)			0.5% RMS or 1.5% P-P of float charge voltage recommended for best results.
			Maximum AC ripple voltage allowed = 1.4% RMS (4% P-P).
			Maximum AC ripple current allowed = 4.6 amperes RMS (C/20).
Self Discharge			Dynasty Broadband batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter.
Accessories			Inter unit connectors, racks and cabinet systems are available.
Terminal			"L" terminal with 0.28" clearance hole to accept 0.25" (6mm) bolt.
Terminal Hardware Initial Torque			65 in.-lbs. (7.4 N-m).
Terminal Hardware Annual Retorque			52 in.-lbs. (5.8 N-m).

Return